Perfect imitation of natural wood. Completely new dimensions and composition of raw materials.
NEW! YAKISUGI
160 X 4000 x 28 MM
MASSARANDUBA
160 X 4000 x 28 MM
BANGKIRAI
160 X 4000 x 28 MM
GARAPA
160 X 4000 x 28 MM
WINCHESTER
160 X 4000 x 28 MM
PALISANDER
160 X 4000 x 28 MM
PATINA OAK
160 X 4000 x 28 MM
You'll think it's wood.
Dedicated finishing strip.
Color durability unattainable so far.
The surface of the board is made of a polymer blend without the addition of wood. This makes it much more resistant to dirt and scratches. It also dramatically increases color durability.
Mounting accessories
Joists
ALUMINIUM JOIST
Joist with enhanced strength and stiffness, recommended for Forest Plus board. Perfect for installation on suspended structures – i.e. on concrete pillars. It allows the construction of the so-called “floating terraces”. The width and height of the joist can be used interchangeably, depending on needs.
Specifications:
- length: 4000 mm
- width: 30 mm
- height: 35 mm
LOW JOIST
Dedicated to the mounting of boards on balconies and terraces – where boards are placed directly on a concrete slab or tiles. The lower part of the joist must adhere with the entire surface to the substrate.
Specifications:
- length: 4000 mm
- width: 40 mm
- height: 20 mm
STANDARD JOIST
Universal – for use on any type of surfaces. The lower part of the joist must adhere with the entire surface to the substrate. By adjusting the top and the lateral side of the joist to the clip, its height and width may be used interchangeably.
Specifications:
- length: 4000 mm
- width: 50 mm or 40 mm
- height: 40 mm or 50 mm
Composite finishing strip
NEW! YAKISUGI
MASSARANDUBA
BANGKIRAI
GARAPA
WINCHESTER
PALISANDER
PATINA OAK
The strip is made of the same blend of polymers as the surface of the FOREST Plus board – which allows for a perfect color matching of the strip to the board. In combination with the sliding clip it prevents the “swaying” of the strip with its relaxation under the influence of temperature. Available in five colours, perfectly matched to the colour of the boards.
Specifications:
- length: 4000 mm
- width: 96 mm
- height: 12 mm
Aluminium finishing strip
SILVER
DARK BROWN
BLACK
Aluminium finishing strip is ideal for the corners of stairs. Thanks to the process of anodizing (protecting the aluminium surface) this strip is characterized by increased resistance to abrasion.
Specifications:
- length: 4000 mm
- width: 42 mm
- height: 82mm
Accessories for assembly of strips
The original Timberness system allows the installation of finishing strip without visible, unsightly screws.
OMEGA SLIDING CLIP
Innovative sliding clip made of stainless steel. Mounted with a joint to the front or side of the board or beam. It enables invisible, durable assembly of a finishing strip. It ensures free movement of the strip. OMEGA clip is universal – suitable for every type of Timberness board.
PVC FOREST PLUS JOINT
PVC joint is used for mounting the sliding clip to the board. When mounted from the face of the board, it is glued to it when placed in the hollow chambers of the board, and when mounted on the side edges of the board – mounted by means of screws. Note: the PVC joint is dedicated to the board – only the PVC FOREST Plus joint can be used when selecting the Timberness FOREST Plus board.
Kits for assembly of boards
Kits for assembly of boards
The set comprises of stainless steel clips and screws. Starting clip is used to mount the first board. While T-Clip, M-Clip or T-Clip Flat allows the connecting of the boards together. Its unique design ensures a stable assembly while compensating for movements of boards under the influence of temperature. It leaves a permanent dilatation between the boards.
The assembly kit comprises of:
50 T-Clips or M-Clips or T-Clips Flat
4 starting clips
set of self-tapping screw